Thursday, November 17, 2016

Bachmann HO "Cargo King" Starter Set


The GP40 is a 4-axle diesel-electric road-switcher locomotive built by General Motors, Electro-Motive Division between November 1965 and December 1971. With a EMD 645E3 16-cylinder engine generating 3,000 hp (2,240 kW).
The GP40 is 3 feet longer than its EMD 567D3A-engined predecessor, the GP35, and distinguished visually by its three 48-inch radiator fans at the rear of the long hood,

while the GP35 has two large fans and a smaller one in between.

It was built on a 55 ft frame; the GP35 was built on a 52 ft frame - as was the GP7, 9, 18, and 30. The difference in length can be seen in the GP40's ten handrail stanchions compared to the GP35's nine.

1,187 GP40s were built for 28 U.S. railroads; 16 Canadian carriers, Canadian National; and 18 were built for two Mexican carriers, Ferrocarril Chihuahua al Pacifico and Ferrocarriles Nacional de Mexico.

60 units were built with high-short-hoods and dual control stands for Norfolk & Western Railway. Two passenger versions, the GP40P and GP40TC, were also built, but on longer frames to accommodate steam generators and HEP equipment.
Discontinued January 1, 1972,  replaced by the GP40-2, which has a modular electrical system and a few minor exterior changes.

Saturday, November 5, 2016

Harry Potter and "The Sorcerer's Stone' Express HO train

Harry Potter and The Sorcerer's Stone (SOLD)

This is a train I have Listed on E Bay. The train as you can see is in very nice condition. And does work both front and back comes with enough track to make an oval. The video below is the train under operation. The engine does need a set of piston arms to make 100% perfect that can be purchased on the Bachmann web site If you are interested in this for your collection you can find it by clicking the link under the Video to my E bay listing.






Thursday, March 24, 2016

Kansas City Southern - EMD E6A Diesel Locomotive

Trains are a fascinating piece of our history.
Rock Island locomotive 630.jpg
EMD E6A Loco with Pusher. Wikipedia picture
The EMD E6 was a 2,000-horsepower passenger train locomotive manufactured by Electro-Motive Corporation, and its corporate successor, General Motors Electro-Motive Division, of La Grange, Illinois.

E6A was manufactured from November 1939 to September 1942, and 91 were produced.

The booster version, or E6B, was manufactured from April 1940 to February 1942, and 26 were produced. The 2,000-horsepower (1,500 kW) was

Monday, November 17, 2014

A visit with Red Pine Precision Modeling

 My wife and I were looking for a place to store our camper for the winter and came across an ad in Craig's List that fit the bill for what we wanted.
So this visit was purely by divine coincidence.
Once we arrived to saw the storage facility that we would be renting.

As we walked down to the buildings we began talking with Nancy Cox. and really enjoying the conversation talking about their acreage, grandchildren, the weather, and much more.

 Thomas joined us shortly in the storage building and started another round of conversation.
We must have talked for a good 45 min to an hour before walking up to their house to complete the lease for storage. Inside we began talking and chatting

Friday, March 14, 2014

Inexpensive Ways to Make Trees

Inexpensive Ways to Make Trees and Ground Cover For Your Model Railroad Layout

making trees
One of the most exciting aspects of model railroading is creating the scenery to enhance the landscape of a layout. The scenery is what adds the personality and interest to a layout to make it truly unique.
There are all sorts of scenery accessories you can purchase from online model train stores, but many things can be made from everyday items around the home. You do not always need to spend money when there are things around you for free.

Twigs from your back yard are a good example. They can be used for making small trees and shrubs, or be cut to resemble logs. There is no need to paint them, because they are already the right color. Small wooden meat skewers (from the supermarket) can also be used to make logs and they are very inexpensive to buy.
The same goes for adding grass to your layout. You can purchase some very good products such as "Static Grass Flock" to provide ground cover, or you can make your own. Some model railroaders use a mix of ready-to-use grasses from the hobby store, and combine this, with there own home made grass recipe.

Model Railroad Scenery-How to Add Excitement

Model Railroad Scenery How to Add Excitement on Your Model Train Layout

Creating realistic scenery is the part that pulls your model railroad layout together and brings it to
life. Little details can make a big difference, as many spectators will spend a lot of time watching the trains operate, so they will get to notice the little things that add to the overall effect. Your visitors will see the vegetation that grows alongside the track and notice the signs on the buildings and the weathering techniques used on the trains.

Tunnels and a bridge will add interest to a model train layout. You will need a rail station too. Put operating signals at crossings. Use either a set of crossing flashers or a flasher and drop-arm combo. Kids (and adults too) are mesmerized by the 'lights and action' items.
Other ideas like a working grain elevator, water tower, coal loaders, or a control towers help complete a scene. 

Be creative, but specific, when making scenery for your model railroad layout.
Make sure any vehicles and rail crossings are from the right era. One idea is black washing the grilles and hubcaps to add depth and realism to the scene. Using a small brush you can also paint taillights, parking lights and door handles if needed. Then consider taking the cars apart and install drivers and passengers. Nothing looks more unreal on a layout than vehicles seemingly driven by invisible ghosts!



A Key To Keeping Trains In Mint Condition

A Key To Keeping Trains In Mint Condition Protected From Dirt, Dust And Grime

Model railway locomotives and rolling stock all need to be kept clean and well-maintained, as does the track-work and layout in general. It can be a constant job to keep things operating efficiently and protecting trains and structures from dirt, grime and dust build up. Some veterans in the hobby give the scenery and track a light spray with distilled water as one method of maintaining it in good condition. There are various other tasks including track cleaning and locomotive lubrication that need to be done periodically. When the tracks are dirty the trains will pick up the dirt and dust and this can potentially cause big problems. Leaving locomotives sitting on track for days, weeks, or months on end can also be problematic.

One of the most important accessories in the model train hobby has to be model train storage boxes. These boxes are a must in order to keep your train in mint condition.


Click here for lots more clever model train layout ideas
                                                                  Clickbank Affiliate Ad: to DCC Model Train Club.

There are various options, the first being to make your own storage system. It depends how fussy you want to be whether you make them out of wood, cardboard, or buy ready-made plastic containers. The important thing is to protect your trains from damage and dust.